Americos Industries Inc. Ahmedabad, Gujarat

Send SMS
Contact Us

Wrinkle Free Treatment

Wrinkle-free Treatment

Americos Wrinkle Free ARN
Introduction:
Americos Wrinkle Free ARN is glyoxal based self-catalyzed cross-linking agent. It provides crease resistant, dimensionally stable finishing of textiles of cellulosic fibers and their blends.

Features of Americos Wrinkle Free ARN are:

Property:
Appearance Clear liquid
Chemical character Glyoxal based cross linking agent
Ionic Nature Non-ionic
Solubility Readily dilutable in water
pH 5 ± 1
Foaming property Non-foaming

Application Methods:
Garment in Wash wheel:
Americos Wrinkle Free ARN 60 - 80 g/l
Americos FX 30 10 - 30 g/l
Americos UNI 230 10 - 30 g/l

Treat garments in wash wheel for 5- 0 min. Hydro extract to keep % pick up 70-80% Dry and cure at 130°-150°C for 5 min. (By ironing or in oven)

Padding Method:
Americos Wrinkle Free ARN 60 - 80 g/l
Americos FX 30 10 - 30 g/l
Americos UNI 230 10 - 30 g/l

Pad the fabric with above recipe at 70-80% pick up Dry at 100°-120°C leaving 8-10% moisture in fabric Cure at 150°C for 3-4 min.(on Stenter )

Storage & handling precautions:

Technical Service:
Information covering specific application of this product is available. Americos Industries will work with customers to enhance processes and solve problems. Let us know what you need and we will assist you. (The information and data contained herein are based on controlled lab work. The recommendations are given on experience basis, but cannot be extended to assure every possible case. It should be verified and evaluated by the user through proper testing for the intended conditions of application. Americos does not express or imply any warranty, or guarantee the suitability of the product for the application intended by buyer of the product).

Flame Retardant Finish

Americos Flame Retardant 7290 Americos Flame Retardant 7290 will enable treated cotton and polyester/cotton blends to pass various vertical flame retardant specifications, such as California drapery standards Title # 19, NFPA-701, Federal Test Methods 5903. Etc.

Advantages
Properties
Appearance Water white liquid
pH 5.5-6.5
Ionic nature Anionic
Solubility Miscible with cold tap water in all proportions
Storage Up to one year

Usage :
The Concentration of the pad formulation of Americos Flame Retardant 7290 applied to polyester/cotton blends or 100% polyester will depend upon the flame retardant specifications to be met. For vertical flame tests such as NFPA-701, California drapery tests, New York City requirements, etc., we suggest a dry add-on of 15 -25% based on the weight and construction of fabric. Pad the fabric through a finish solution containing Americos Flame Retardant 7290 35- 60% (ows) to an 80% wet pick-up and dry. The concentration of the pad bath may be adjusted for fabric at 150°C or below to avoid any tendency toward yellowing the cotton portion of the blend.

The addition of 1% (ows) Americos Flame Retardant 7290 to the stock bath will assist in wetting out and penetration. This is especially beneficial when treating tight constructions. Normal wetting agents are ineffective in flame retardant solutions. Americos Flame Retardant 7290 has no wetting properties in plain water; it is an excellent wetting agent and penetrate when used in solutions containing Americos Flame Retardants.

Usage continued :
The chemicals in this compound are composed of a water solution of salts. Concentrated solutions accidentally spilled on the skin or in contact with the eyes should be thoroughly rinsed with water.

Storage & Handling Precautions:
Technical Service :
Information covering specific application of this product is available. Americos Industries will work with customers to enhance processes and solve problems. Let us know what you need and we will assist you. (The information and data contained herein are based on controlled lab work. The recommendations are given on experience basis, but cannot be extended to assure every possible case. It should be verified and evaluated by the user through proper testing for the intended conditions of application. Americos does not express or imply any warranty, or guarantee the suitability of the product for the application intended by buyer of the product).

Stain-guard Finishing Agent for Dust

Americos Nanodure SGDS (Stain-guard finishing agent for dust, sand & dry soil)
Americos Nanodure SGDS is a special stain-guard finishing agent of the dust, sand and dry-soil (mud, clay) staining. Americos Nanodure SGDS can remarkably prevent attaching these staining on the fabric, and can easily be removed these staining from the fabric. Therefore the clean fabric is always keeping.

Americos Nanodure SGDS is effective for all kinds of woven and knit fabric such as cotton, wool, polyester, nylon, acrylic, and their blends. And this stain-guard effect has the good durability under repeated washing.

Chemical composition:
Appearance Semi-transparent liquid
Ionic activity Cationic
pH 7–8
Main component Special modified nano-size particle’s water dispersion
Solubility Easily soluble in water

Characteristics:
Americos Nanodure SGDS has the powerful stain-guard effect against of the dust, sand, and dry-soil (mud, clay) staining. And this effect has the good durability under repeated washing. Application:
Americos Nanodure SGDS can be used by padding method, dipping method, or spray method.

Dosage:
Padding method 5–10% soln. Pad » Dry
Dipping method 5–10%owf. Dip » Squeeze » Dry

{Normal temperature. X 10 min. Dipping Bath ratio 1:10 }

Stain-guard effect: Precautions in storing: Technical Service:
Information covering specific application of this product is available. Americos Industries will work with customers to enhance processes and solve problems. Let us know what you need and we will assist you. (The information and data contained herein are based on controlled lab work. The recommendations are given on experience basis, but cannot be extended to assure every possible case. It should be verified and evaluated by the user through proper testing for the intended conditions of application. Americos does not express or imply any warranty, or guarantee the suitability of the product for the application intended by buyer of the product).

Cationic Softener Flakes

Americos Catasoft 2000 Flake is an excellent cationic softener, cold water rapid soluble for cotton, terry cotton knitted blend fabrics, and for resin processing industry. It has a very good hand feeling and antistatic properties. Because of its low-yellowing specific characteristic, it is very suitable for blue and white jeans laundry or stone-washing processing.

Characteristics:
AppearanceLight yellowing white flake
IonicCationic
pH 2% solution4.5 ± 1
ContentPolyamine derivatives
SolubilitySoluble in cold water


Advantages:

Application:Technical Service :
Information covering specific application of this product is available. Americos Industries will work with customers to enhance processes and solve problems. Let us know what you need and we will assist you. (The information and data contained herein are based on controlled lab work. The recommendations are given on experience basis, but cannot be extended to assure every possible case. It should be verified and evaluated by the user through proper testing for the intended conditions of application. Americos does not express or imply any warranty, or guarantee the suitability of the product for the application intended by buyer of the product).

Additional Information:

Anti Microbial Treatment

Americos Anti-Microbial 400 (Anti-bacterial agent for textile) The Sanitary Finished Americos Anti-Microbial 400 is a nano corpuscle anti-bacterial agent effective for all kinds of fibers (especially excellent for natural fibers). It holds the anti-bacterial ability to many kind of germs, and the durability is excellent. (Staphylococcus, pneumococcus, Escherichia coli, ticks, fungus) Also, it is low virulent and the degree of purity is high, and safe for high temperature heat and for UV rays. The solubility to water and the compatibility with resistant type resin and fabric softener is excellent. The Americos Anti-Microbial 400 does not have discoloration or damage, and gives sanitation to the fabric.

Composition :
Polyhexamethyleneguanidine phosphate

Properties :
AppearancePowder
IonMild cation
SolidityAbove 100%
Specific gravity1.0
pH7.0
SolubilityEasily solutes in warm water

Special features:

Application range:

Application:
The amount of usage differ from the type, density, thickness, and the treatment method, but the standard amount of usage is 0.2-1%

Padding process:
Suitable amount of usage0.2 - 1%
Pick up ratio70 - 80%
Dry130° - 150°C (30 - 40 Yds /min.)

Technical Service :
Information covering specific application of this product is available. Americos Industries will work with customers to enhance processes and solve problems. Let us know what you need and we will assist you. (The information and data contained herein are based on controlled lab work.

Anti-foaming Agent

Americos Antifoam ST
Introduction :
Americos Antifoam ST is a highly concentrated anti foaming agent. It is recommended for exhaust treatment in machines with high turbulence like jet machine, soft flow machine, etc.
Appearance Pale yellow viscous liquid
Chemical nature Mixture of ethoxylated fatty matters
Viscous at 40°C 250 ± 20 cps
pH 6 - 8
Specific gravity 1

Application :
Americos Antifoam ST 0.1 - 0.5 gl

Storage & Handling Precautions : Technical Service :
Information covering specific application of this product is available. Americos Industries will work with customers to enhance processes and solve problems. Let us know what you need and we will assist you. (The information and data contained herein are based on controlled lab work. The recommendations are given on experience basis, but cannot be extended to assure every possible case. It should be verified and evaluated by the user through proper testing for the intended conditions of application. Americos does not express or imply any warranty, or guarantee the suitability of the product for the application intended by buyer of the product).

Dispersing Agent

Americos Dispersol DX
Introduction :
Americos Dispersol DX is anionic dye dispersing agent. It prevents dyestuff agglomeration and prevents precipitation in dye bath.

The Features of Americos Dispersol DX are : Properties :
AppearanceBrown liquid
Ionic natureAnionic
Density (20 °C)1.2 g/cm3
pH (10 % solution) water5.5 - 7.5
Dissolving / dilutionEasily diluted with water
Stability to acid, alkalis, salt and hard waterGood

Dyeing of polyester and triacetate fibers with disperse dyes
Americos Dispersol DX is a dispersing agent used to disperse dyes in the preparation bath before dyeing and to maintain the stability of the dispersion during dyeing. The amounts required are 2 g/l Americos Dispersol DX in the preparation bath and 0.5-2 g/l in dye baths, depending on depth of shade and liquor ratio.

Application Method :
  1. Preparation of the dye bath liquor. Sprinkle disperse dyes into 10-15 parts soft water (30° - 40 °C) containing dissolved Americos Dispersol DX and stir continuously. Dilute further with water. This liquor is then added to the dye bath.
  2. Application in the dye bath to maintain the stability of the dispersion during dyeing, add 0.5-2 g/l pre-dissolved Americos Dispersol DX, depending on depth of shade and liquor ratio, to the warmed dye bath. Then add the normal amounts of carrier required for dyeing at the boil or leveling agents required for HT dyeing. Add thoroughly dispersed dye as usual.
Dyeing cellulosic fibers with vat dyes
When dispersing large quantities of dyes, it is advisable to add 1.5-3 g/l Americos Dispersol DX. When working with vat dyes, Americos Dispersol DX improves the levelness of pigmentation, especially on circulating liquor units. For the exhaust, pigmentation and half-pigmentation processes, add 1.5 - 3 % Americos Dispersol DX

Dyeing polyester/wool blends
Americos Dispersol DX is required to ensure that the dyes remain finely dispersed throughout the dyeing process. This is particularly important when dyeing wound packages and at short liquor ratios. Americos Dispersol DX also has good leveling action on 1:2 metal complex dyes.

Application Method :
Heat the liquor to 30-40 °C and add 1-2 % Americos Dispersol DX (pre-dissolved). Then add acetic acid and the carrier. When the acid and auxiliary have been dispersed evenly, add the well-dispersed or dissolved dyes. Dye and finish as usual.

Dye Fixing Agent

Americos Washfix
Introduction
Americos Washfix is non-formaldehyde base dye fixing agent for direct and reactive dyestuffs for imparting excellent light-fastness, chlorine-fastness, etc. There is no dye bleeding during washing.

Advantages Properties
Appearance Colorless Liquid
Ionicity Cationic
Solubility Soluble in water
pH (2% Solution) 4.0 - 5.5
Odor None
Solid % 45
Storage Sensitive to heat over 60°C

Dose:
Use 2-5 g/l after completion of dyeing and soaping.
Storage & handling precautions
Technical Service
Information covering specific application of this product is available. Americos Industries will work with customers to enhance processes and solve problems. Let us know what you need and we will assist you.

(The information and data contained herein are based on controlled lab work. The recommendations are given on experience basis, but cannot be extended to assure every possible case. It should be verified and evaluated by the user through proper testing for the intended conditions of application. Americos does not express or imply any warranty, or guarantee the suitability of the product for the application intended by buyer of the product).

Liquid Optical Brightener for Cotton

Americos Opti-Bright XBL (Fluorescent Brightener for Cotton & Pulp) Americos optical brightening agent is highly concentrated optical brightener for cellulosic fabrics. The brightness obtained by Americos Optibright XBL has a bluish tone. It is used in low dosages and is cost effective.

The advantages of Americos Opti-Bright XBL are
Properties
Appearance liquid
Density 1.2 gm /ml
pH 8 ± 1
Ionic nature Anionic
Solubility Complete
Dosage 0.1-0.5% (owf)

Applications
Americos Opti-bright XBL can be applied at the final stage of processing or a stage earlier. It can be used in hydrogen peroxide/chlorine bleaching bath at elevated temperature of up to 150°C. The dosage may vary from 0.1% to 0.5% (on weight of material). The processing time can be adjusted between 10 to 30 minutes.

Storage & handling precautions Technical Service
Information covering specific application of this product is available. Americos Industries will work with customers to enhance processes and solve problems. Let us know what you need and we will assist you. (The information and data contained herein are based on controlled lab work. The recommendations are given on experience basis, but cannot be extended to assure every possible case. It should be verified and evaluated by the user through proper testing for the intended conditions of application. Americos does not express or imply any warranty, or guarantee the suitability of the product for the application intended by buyer of the product).

Luster Removal Agent

Americos AK 1500
Introduction :
The Americos AK 1500 is a special high molecule composition developed for fabric luster removal agent.

Properties :
Appreance Milky white emulsion liquid
pH 4.0 ± 1.0
Solid 38 ± 1%
Main Ingredient Special high molecule composition
Ionic Non-ionic

Special features:
Usage :
It is differs from material to material, but the standard amount of usage is 5-10 g/l in warm water
Storage & Handling Precautions :
Technical Service :
Information covering specific application of this product is available. Americos Industries will work with customers to enhance processes and solve problems. Let us know what you need and we will assist you. (The information and data contained herein are based on controlled lab work. The recommendations are given on experience basis, but cannot be extended to assure every possible case. It should be verified and evaluated by the user through proper testing for the intended conditions of application. Americos does not express or imply any warranty, or guarantee the suitability of the product for the application intended by buyer of the product).

Oil And Water Repellent

Americos Olifulant-O-W-992 (Oil and Water repellent finish)Introduction :
Americos Olifulant-O-W-992 is resistant to water- and oil- borne stains which are highly desirable features for many textile uses including outerwear, home furnishings and industrial fabrics. The excellent water repellency and high degree of oil repellency provided by Americos water repellent finish, oil repellent finish is durable to washing and dry-cleaning.

Special Features: General Properties :
AppearanceOpaque liquid
TypeFluorochemical emulsion
pH6
Viscosity (25°C)50 cps
Density (25°C)8.8 lbs/gal
Ionic natureCationic
SolubilityMiscible in water

Water and Oil Repellent Finish for Textiles:
Fabric preparation:
For maximum water repellency, fabrics should be free of all sizing agents, wetting agents, alkali and other additives, which may have a tendency to interfere with repellent properties. Fabrics should be well prepared and left slightly acidic for best results.

Silicone defoaming agents reduce oil resistance and their use should be avoided in all preparation stages, including sizing of the warp. Silicone water repellents are also very detrimental. The presence of these materials even in minute amounts makes it practically impossible to obtain a satisfactory oil rating.

Bath make-up :
Americos Olifulant-O-W-992 is an aqueous emulsion that is readily dispersible in water. It is compatible with many resins, catalysts, hand-builders and other finishing products. The order and manner of addition of these products could affect bath stability. Americos Olifulant-O-W-992 emulsion should be the last add to the bath and should be pre-dispersed with an equal quantity of water. It is recommended that bath temperature be in the range of 80°-100°F. Excessive high-speed mixing of the bath should be avoided.

Processing conditions:
Impregnation:
Pad the fabric with Americos Olifulant-O-W-992 using a two or three bowl padding mangle. Cloth that enters the bath should be at room temperature to prevent warming the pad bath. Placing a cooling fan in front of the padding mangle may help this.

Pre-drying: For best results, the impregnated fabric should be pre-dried nearly to 30-40% moisture content before entering the drying chamber and this would increase the process speed. Infrared pre-driers are preferred, but roller type pre-driers or Teflon coated cans may also be used.
Drying :
For fabrics that require heat setting, temperature inside drying chamber may be kept at 365° to 400°F.

Curing: Sixty seconds at 340°F is a typical curing method, however, the optimum time and temperature may vary with fabric type and its blend, GSM and oven characteristics.

Micro Encapsulated Fragrance

Micro Encapsulated Fragrance
Americos Fragrance EXL (Microcapsules to Textiles)1. One Bath Pad-Dry Method:
Preparation:
All products should be diluted first before mixing, Never add capsules in concentrated form into the bath.

Pad Through Following Trough Mixture:
Americos Wettex 800 : 0.1 g/l (Wetting agent) / Nonionic penetrating0.1 g/l
Americos Fragrance EX30 g/l
Americos Resin Binder (Nonionic Acrylic Binder)50–80 g/l
Americos Nanosoft ASAM20 g/l

Finally make up the bath to 1000 parts with water.Pad the fabric with the above recipe for 90% pick-up and then dry/cure at 155°C for 30 seconds.

2. Exhaust Method:
Steps involved in the exhaust method:Storage & Handling Precautions:Technical Service:
Information covering specific application of this product is available. Americos Industries will work with customers to enhance processes and solve problems. Let us know what you need and we will assist you. (The information and data contained herein are based on controlled lab work. The recommendations are given on experience basis, but cannot be extended to assure every possible case. It should be verified and evaluated by the user through proper testing for the intended conditions of application. Americos does not express or imply any warranty, or guarantee the suitability of the product for the application intended by buyer of the product).

Vitamin E Finish

Americos Vitamin E Finish (Microcapsules to Textiles)
(1) One Bath Pad-Dry MethodPreparation
All products should be diluted first before mixing, Never add capsules in concentrated form into the bath.

Pad Through Following Trough Mixture

Finally make up the bath to 1000 parts with water.Pad the fabric with the above recipe for 90% pick-up and then dry/cure at 155°C for 30 seconds.

(2) Exhaust Method:
This method is recommended for garment processing and should not be applied in the jet.

Steps involved in the exhaust method

Storage & Handling Precautions

Technical Service:
Information covering specific application of this product is available. Americos Industries will work with customers to enhance processes and solve problems. Let us know what you need and we will assist you. (The information and data contained herein are based on controlled lab work. The recommendations are given on experience basis, but cannot be extended to assure every possible case. It should be verified and evaluated by the user through proper testing for the intended conditions of application. Americos does not express or imply any warranty, or guarantee the suitability of the product for the application intended by buyer of the product).
X
Provide Us More Details
Purpose of Requirement:

Reselling End Use Raw Material

X

Looking for Wrinkle Free Treatment ?

    country-ico

    We will contact you soon !

    Rohit Sharma

    (Marketing Head)

    Americos Industries Inc.

    Navrangpura Village, Ahmedabad, Gujarat, India

    More Categories

    View All Categories »
    Send SMS
    Contact Us